TV200 single vibrating rod level switch

TV200 highly sensitive single vibrating rod level switch mainly is mainly used in many industries to control or alarm level of solid material and liquid level. Rounded and smooth probe can anti clipping material and pasting material very well, and keep working reliably under the condition of having more hanging material. TV200 can’t be affected by the electronic nature of measured material, and can be put into using with no adjusting after the switch is mounted. The meter is widely used in many fields such as petrochemical, power generated, metallurgy, textile, light industry, food, medical, and so on.

Features

　　* Rounded and smooth single probe to prevent clipping or pasting material

　　* Cleaning surface by self-vibration, can be used with no waiting and correction after mounting

　　* TV200 can’t be affected by the electronic nature of measured material, sensitivity level is adjustable

　　* No movable element. firm stainless steel probe can endure impaction and wear.

　　* Anti-jam, anti corrosive, and endurance of over pressure
 

Technology performance

　　Medium: liquid, solid grain

　　Power supply: 220VAC 50Hz or 24VDC

　　Power consumption: about 3 W

　　Vibration frequency: about 300Hz

　　Delay time: the time from vibration to stop is 0.5s

　　The time from stop to vibration is 1~2s

　　Work pressure: -0.1~2MPa

　　Work temperature: probe: -30~150℃

　　Circuit: -30~70℃

　　Output relay: SPDT, single - pole, double - throw switch

　　Normal open is NO. Normal close is NC. Common terminal is COM

　　Container of contacting point: 250VAC 10A, 30VDC 5A

　　Density of medium: minimum is 0.2g/cm3

　　Sensitivity: high sensitivity is used in light medium with density in range of 0.2~0.5g/cm3;
                        standard sensitivity is used in normal medium with density in range of more than 0.5 g/cm3;
                        low sensitivity is used to measure viscous medium.

　　Humidity effect: no affect in 0~95% relative humidity

　　Outer shell: die casting aluminum

　　Protection level: IP65

　　Electrical port: M20×1.5 female thread

　　Process connection: 1-1/2″NPT male thread or flange mounting

　　Measurement probe: 1Cr18Ni9Ti stainless steel

　　Maximum weight of Probe: 100kgf

　　Total weight: standard 2.5kg